The NVIDIA GeForce RTX 5090 is one of the most power-hungry graphics cards in the world. With a base TGP of 575W, you need a very powerful power supply to run it. However, the latest leaked prototype of the RTX 5090 suggests it could have been even more demanding. Four Power Connectors for More Power https://twitter.com/yuuki_ans/status/1926903505274433943 According to the leak that includes a photo of an early prototype of the RTX 5090, this version of the card had no less than four 16-pin power connectors. This setup would allow the card to draw up to a shocking 2,400W of power,
In most household shocks, you touch a conductor, and you are the resistor to ground. Your resistance is independent of the drive voltage, so if you touch a 110V wire, the current will be half of what you get with a 220V wire. So the voltage determines the current, and thus the lethality.
There’s lots of other factors that go into the effective resistance like the amount of moisture on your skin, what shoes you’re wearing, and what the floor is made of, etc, but in all cases twice as much voltage will cause twice as much current. You are by far the highest resistance element in the circuit, so your resistance will completely determine the current - most household circuits are capable of supplying 10-15A continuously, so your resistance is the current limiter.
It’s a bad idea either to go touching live wires either way, but the rule of thumb I heard was was that a 110V shock usually won’t kill you and 220V shock usually will.